Products

Specifications Item Index Appearance Orange-yellow to reddish brown liquid Density (20℃)，g/cm3 0.95-1.05 PH      ≥ 7.0 Condensation point    ℃    ≤ -4.5 Solubility Soluble in water Corrosion rate，mm/a       ≤ 0.076 Usage The concentration used is usually 50-100 PPM. Package and Storage 200kg plastic lined iron drum or 25kg plastic drum package. Store in a cool, dry place indoors with a shelf life of one year.

Oil Demulsifier Crude Oil Specifications Item Index Appearance Homogeneous liquid Density, g/cm3           ≥ 0.950 Condensation point,  ℃   ≤ -15.0 Relative dehydration rate,   %     ≥ 90.0   Oil Demulsifier Features (1) Fast effect speed, and remarkable effect of demulsification and dehydration. (2) Function of preventing wax, reducing viscosity and reducing back pressure. (3) Good adaptability of demulsification and dehydration and broad spectrum. Oil Demulsifier Crude Oil Usage Each ton of crude oil (output liquid) was added at 0.05-0.1kg (50-100mg/L) and mixed evenly with static settlement. The AD-501 oil demulsifier was added from the wellhead casing by means of the wellhead injection. Package and Storage 50kg, 200kg iron drum or plastic drum packaging; in addition Store in a cool, dry place indoors with a shelf life of one year.

Physical properties of Recirculating Cooling Water Non-oxidizing Fungicide: Items Index Appearance Dark yellow to light green liquid PH 4.0-6.0 Active content,% ≥50 Density(20℃),g/cm3 1.05±0.05 Usage: Recirculating Cooling Water Non-oxidizing Fungicide is used for circulating water, sewage, re-injection water, seawater and other bactericidal algae slime stripping. The dosage is determined according to the water quality. Packaging and storage： Packed in plastic drums, net weight 1000kg/25kg per drum. Store in a cool, dry place indoors for 2 years.

Specifications Item Index Appearance Colourless to Yellowish Transparent Liquid Active matter content  % 45.0±1.0 PH (2% aqueous solution) 6.0-8.0 Ammonium salt content  ≤ 4.0 Package and Storage Packed in plastic drum, 1000kg/25kg net weight per drum; Store in a cool, dry place indoors with a shelf life of two years.

Circulating Cooling Water Corrosion Inhibitor Physical Properties Items Unit Index Appearance Clear colorless to pale yellow liquid Phosphonates (calculated as PO43-) % ≤20.0 Phosphite (based on PO43-) % ≤1.0 Orthophosphate (calculated as PO43-) % ≤0.5 Solid content % ≥32 Density (20°C) g/cm3 ≥1.15 pH value (1% aqueous solution) 3.0±1.5 Circulating Cooling Water Corrosion Inhibitor Usage: Circulating cooling water corrosion inhibitor can be used directly as liquid, and the dosing method can be any one of automatic dosing device, gravity self-flow dosing and one-time dosing method. Packaging and Storage： Packed in plastic drums, net weight 1000kg/25kg per drum. Store in a cool, dry place indoors for 2 years. Download Cooling Water Corrosion Inhibitor MSDS

RO Membrane Biocide Features： 1). RO Membrane Biocide is non-oxidative biocide that can clear microorganisms fast and effectively prevent all fungi and biological slime from growing and forming on the membrane surface. 2). With a wide pH value range, it has good biodegradable property, making it a relatively non-toxic product. Its main degrading ways is to quickly react with nucleophile and organics without polluting the environment. 3). It is compatible with polyamide film and PVDF film. 4). It is in liquid form and easy to dilute, and enjoys good solubility and stability. 5). Add it during the normal operation, no need of shutdown. 6). It is used as auxiliaries for online cleaning in the reverse osmosis system. RO Membrane Biocide Physical Properties: Items Index Appearance Colorless and transparent liquid Odor Light odor PH(10% water solution) 3.0-7.0 Density(20℃) ≥1.05 RO Membrane Biocide Usage: RO Membrane Biocide is a non-oxidative broad-spectrum inhibitor. Biocide is economically efficient with small dosage and fast efficiency. It ensures bio-free treatment in the whole process. RO Membrane Biocide membrane element bactericide is a kind of non-oxidizing bactericide and directly acting on the membrane, so the drug adding point needs to be after the pre-treatment and before the security filter, which can reduce the drug consumption and ensure the anti-Infiltration system has a good effect. The diluted solution should be used in time for the best effects. The dosage should depend on the inlet water quality and the severity of the microorganism. It is calculated by the technical engineer of Unichimica and the professional software according to the water quality. Quality Guarantee: 12 months at 25℃ in indoor temperature in cool and shady environment. Packaging: 20 kg per barrel (5 gallons). Download RO Cleaning Industrial Fungicide MSDS

Physical and Chemical Properties: Appearance Clear colorless transparent liquid Odor Slight PH (1% aqueous solution) 1 ～2 Specific gravity (20 °C) 1.20 ～ 1.40g/cm3 Instructions for Use: RO Scale Inhibitor is a highly efficient liquid scale inhibitor used to control fouling deposits in membrane separation systems and reduce particulate obstruction. Using this product can significantly extend the equipment's operating cycle and service life. The product is corrosive and antiseptic dosing equipment should be used. The recommended dosing point is preferably before the security filter device. Diluted solution should be used as soon as possible in order to achieve the best results. Appropriate dosing amount should be calculated according to local water quality conditions by special dosing software. Shelf life: The shelf life is 24 months at 25°C in a cool sheltered environment. Packing Specification: RO Scale Inhibitor is delivered to customers with 8 times concentrated solution to save on transportation costs and storage space. Each barrel (5 gallons) of concentrated liquid weighs 25 kilograms, diluted 8 times (25 * 8) and converted to 200 kilograms of standard solution.  Download RO Scale Inhibitor MSDS

Cationic Poly Acrylamide Specifications: ※ Cationic Poly Acrylamide Appearance: White powder or granular appearance ※ Solid content: ≥90% ※ Molecular weight: 800-1200 million ※ Insoluble matter: ≤0.5% ※ Residual unit: ≤0.05% ※ Cation degree: 10-90 % ※ Dissolution time: ≤60 minutes The Scope of Application: 1) For sludge dewatering depending on the sludge properties, the corresponding grades of Cationic Poly Acrylamide products can be used. The sludge can be effectively dewatered before the sludge enters the pressure filtration. When the sludge is dewatered, large flocs and non-sticky filter cloths are produced. Scattered, thick mud cake flow, high dewatering efficiency, mud cake moisture content below 80%. 2) For the treatment of domestic sewage and organic waste water, cationic poly acrylamide products are all positive in compatibility or alkaline medium, so that the flotation and sedimentation of sewage with suspended particles in the sewage with negative charge is very effective. Such as the production of grain alcohol wastewater, papermaking wastewater, municipal wastewater treatment plant wastewater, brewery wastewater, monosodium glutamate wastewater, sugar wastewater, organic high wastewater, feed wastewater, textile printing and dyeing wastewater, using cationic poly acrylamide than anion, Non-ionic poly acrylamides or inorganic salts are several or more times more effective because such wastewaters are generally negatively charged. 3) The flocculating agent for tap water with river water as the source of water is less in amount, effective, and low in cost, especially in combination with inorganic flocculants. It will become the tap water for the Yangtze, Yellow and other river basins. The plant's efficient flocculant. Cationic Poly Acrylamide Usage 1).Through a small test to determine the best model, and the product's optimal dosage. 2). The product is formulated as an aqueous solution with a concentration of 0.2% (referring to the solid content), preferably neutral water without salt. 3). Dissolved water, the product evenly sprinkled into the stirring water, appropriate heating (<60 °C) can be accelerated into a solution (stirring time is about 40 minutes). 4). Solid products should not be sprinkled on the floor to prevent the product from becoming slippery after absorbing moisture. 5). The preparation of Poly Acrylamide aqueous solution should be carried out in enamel, galvanized, aluminium or plastic barrels. It cannot be prepared and stored in iron containers. 6). When dissolving, care should be taken to add the product evenly and gradually to the dissolver with stirring and heating measures. The solidification should be avoided. The solution should be prepared at a suitable temperature, and mechanical shearing should be avoided. Mixer 60-200 rev / min, otherwise it will lead to polymer degradation, affecting the use of effects. 7). The  Poly Acrylamide solution should be ready for use. When the solution is left for a long time, its performance will gradually decrease depending on the water quality. 8). After adding an aqueous flocculant solution to the suspension, if the stirring is vigorously performed for a long time, the formed flocks will be destroyed.   Cationic Poly Acrylamide Packaging, Storage and Handling and Precautions: Solid products are packed in paper bags, lined with plastic bags, 25kg per bag, and can also be packaged according to customer requirements. This product has hygroscopicity, should be sealed and stored in a cool dry place, the temperature is lower than 35 °C, the effective storage period is 2 years.